Low Voltage Power Cables
Low-voltage power cables are designed to transmit power at voltage up to 3.3 KV. These cables are commonly used in various applications, including residential, commercial, and industrial settings.
CU/PVC/PVC
CONSTRUCTION
1. CONDUCTOR
Copper, semi-rigid class 2
2. INSULATION
Polyvinyl Chloride [PVC]
Alternative: Cross-Linked polyethylene [XLPE]
3. SHEATH
Polyvinyl Chloride [PVC]
Rated Voltage: 0.6/1 KV
APPLICATION
For outdoor and indoor installations in dump and wet locations.They
are normally used for power distribution in urban networks and industrial
plants, as well as in thermopower and hydropower stations.
Maximum operating temperature: Maximum operating temperature: 70°C
STANDARDS
IEC 60502-1
IEC 60228
AL/PVC/PVC
CONSTRUCTION
1. CONDUCTOR
Aluminum, semi-rigid class 2
2. INSULATION
Polyvinyl Chloride [PVC]
Alternative: Cross-Linked polyethylene [XLPE]
3. SHEATH
Polyvinyl Chloride [PVC]
Rated Voltage: 0.6/1 KV
APPLICATION
For indoor and outdoor installations in damp and wet locations.
They are normally used for power distribution in urban networks,
industrial plants as well as in thermopower and hydropower stations.
Maximum operating temperature: 90°C
STANDARDS
IEC 60502-1
IEC 60228
CU/PVC/PVC
CONSTRUCTION
1. CONDUCTOR
Copper, semi-rigid class 2
2. INSULATION
Polyvinyl Chloride [PVC]
3. SHEATH
Polyvinyl Chloride [PVC]
Rated Voltage: 0.6/1 KV
APPLICATION
For outdoor and indoor installations in dump and wet locations.
Maximum operating temperature: 70°C
STANDARDS
IEC 60502-1
IEC 60228
CU/PVC/STA/PVC
CONSTRUCTION
1. CONDUCTOR
Copper, semi-rigid class 2
2. INSULATION
Polyvinyl Chloride [PVC]
3. ARMOUR
Double Steel Tape
4. SHEATH
Polyvinyl Chloride [PVC]
Rated Voltage: 0.6/1 KV
APPLICATION
For indoor and outdoor installations in damp and wet locations, Where mechanical damage is expected to occur.
Maximum operating temperature: 70°C
STANDARDS
IEC 60502-1
IEC 60228
AL/PVC/STA/PVC
CONSTRUCTION
1. CONDUCTOR
Aluminum, semi-rigid class 2
2. INSULATION
Polyvinyl Chloride [PVC]
3. ARMOUR
Double Steel Tape
4. SHEATH
Polyvinyl Chloride [PVC]
Rated Voltage: 0.6/1 KV
APPLICATION
For indoor and outdoor installations in damp and wet locations, Where mechanical damage is expected to occur.
Maximum operating temperature: 70°C
STANDARDS
IEC 60502-1
IEC 60228
CU/PVC/SWA/PVC
CONSTRUCTION
1. CONDUCTOR
Copper, semi-rigid class 2
2. INSULATION
Polyvinyl Chloride [PVC]
3. ARMOUR
Galvanized Round Steel Wire
4. SHEATH
Polyvinyl Chloride [PVC]
Rated Voltage: 0.6/1 KV
APPLICATION
For indoor and outdoor installations in damp and wet locations, Where mechanical damage is expected to occur.
Maximum operating temperature: 70°C
STANDARDS
IEC 60502-1
IEC 60228
AL/PVC/SWA/PVC
CONSTRUCTION
1. CONDUCTOR
Aluminum, semi-rigid class 2
2. INSULATION
Polyvinyl Chloride [PVC]
3. ARMOUR
Galvanized Round Steel Wire
4. SHEATH
Polyvinyl Chloride [PVC]
Rated Voltage: 0.6/1 KV
APPLICATION
For indoor and outdoor installations in damp and wet locations, Where mechanical damage is expected to occur.
Maximum operating temperature: 70°C
STANDARDS
IEC 60502-1
IEC 60228
CU/XLPE/PVC
CONSTRUCTION
1. CONDUCTOR
Copper, semi-rigid class 2
2. INSULATION
Cross-Linked polyethylene [XLPE]
3. SHEATH
Polyvinyl Chloride [PVC]
Rated Voltage: 0.6/1 KV
APPLICATION
Semi-rigid for use in low voltage power distribution in fixed
indoor and outdoor installations.
Maximum operating temperature: 90°C
STANDARDS
IEC 60502-1
IEC 60228
AL/XLPE/PVC
CONSTRUCTION
1. CONDUCTOR
Aluminum, semi-rigid class 2
2. INSULATION
Cross-Linked polyethylene [XLPE]
3. SHEATH
Polyvinyl Chloride [PVC]
Rated Voltage: 0.6/1 KV
APPLICATION
For indoor and outdoor installations in damp and wet locations.
Maximum operating temperature: 90°C
STANDARDS
IEC 60502-1
IEC 60228
CU/XLPE/STA/PVC
CONSTRUCTION
1. CONDUCTOR
Copper, semi-rigid class 2
2. INSULATION
Cross-linked polyethylene [XLPE]
3. ARMOUR
Double Steel Tape
4. SHEATH
Polyvinyl Chloride [PVC]
Rated Voltage: 0.6/1 Kv
APPLICATION
For indoor and outdoor installations in damp and wet locations.
Where mechanical damage is expected to occur.
Maximum operating temperature: 90°C
STANDARDS
IEC 60502-1
IEC 60228
AL/XLPE/STA/PVC
CONSTRUCTION
1. CONDUCTOR
Aluminum, semi-rigid class 2
2. INSULATION
Cross-linked polyethylene [XLPE]
3. ARMOUR
Double Steel Tape
4. SHEATH
Polyvinyl Chloride [PVC]
Rated Voltage: 0.6/1 Kv
APPLICATION
For indoor and outdoor installations in damp and wet locations.
Where mechanical damage is expected to occur.
Maximum operating temperature: 90°C
STANDARDS
IEC 60502-1
IEC 60228
CU/XLPE/SWA/PVC
CONSTRUCTION
1. CONDUCTOR
Copper, semi-rigid class 2
2. INSULATION
Cross-linked polyethylene [XLPE]
3. ARMOUR
Galvanized Round Steel Wire
4. SHEATH
Polyvinyl Chloride [PVC]
Rated Voltage: 0.6/1 Kv
APPLICATION
For indoor and outdoor installations in damp and wet locations.
Where mechanical damage is expected to occur.
Maximum operating temperature: 90°C
STANDARDS
IEC 60502-1
IEC 60228
AL/XLPE/SWA/PVC
CONSTRUCTION
1. CONDUCTOR
Aluminum, semi-rigid class 2
2. INSULATION
Cross-linked ployethylene [XLPE]
3. ARMOUR
Galvanized Round Steel Wire
4. SHEATH
Polyvinyl Chloride [PVC]
Rated Voltage: 0.6/1 Kv
APPLICATION
For indoor and outdoor installations in damp and wet locations.
Where mechanical damage is expected to occur.
Maximum operating temperature: 90°C
STANDARDS
IEC 60502-1
IEC 60228